ToyBoard maintenance depends first on its cover. A polyester cover can be removed; a PVC surface can be cleaned directly with a sponge. Before applying heat or a product, identify your model and check its instructions. Cleaning an accessory may also follow other guidelines.
Check the equipment before cleaning it
Inspect the cover, the seams, and the positioning of the cover. If there is a fastener, check its operation and the slider protection according to the instructions. Also look for any foam defect or unusual wear.
Cleaning does not repair a defect. If the equipment no longer seems suitable for use, stop using it and contact the team with the model name and useful photos.
Polyester: follow the cover label
The polyester fabric cover is removable. To remove and replace it, follow the manufacturer's instructions, without forcing the fastener or the seams. Choose the program, temperature, and drying cycle indicated for the fabric you own.
The Endless product sheet indicates a machine wash up to 60 °C for its cover. This information should not be automatically applied to another design or accessory. If the label is missing or illegible, ask for the instructions for the reference before starting the wash.
Once the cover has been maintained according to these instructions, replace it correctly to restore its support. If it is worn or no longer holds as expected, a replacement cover can allow you to renew the fabric without buying the entire board again.
PVC: direct maintenance
For the PVC range, routine maintenance is done with a sponge on the cover. It is not necessary to remove a fabric cover for this cleaning. Follow the instructions in the manual and those of the compatible cleaning product.
In a shared space, the choice of a detergent or disinfectant must remain compatible with the cover. Ease of cleaning does not constitute a hygiene certification or a guarantee of disinfection. If in doubt, ask the manufacturer to specify the procedure.
Store without marking the foam
Bring your ToyBoard inside after an outdoor session and keep it in a dry place. Avoid placing sharp, abrasive, or heavy objects on the board. The foam can temporarily take the shape of an object pressing on it.
A floor stand, a wall mount, or a Totem can meet storage needs. Follow the accessory installation instructions and always remove the board from storage before use.
Accessories have their own instructions
The mat, wooden supports, and lacquered steel Totem do not require the same maintenance as the cover. Check the information for each reference and do not generalize washing temperatures or cleaning products.
Before replacing a part, check compatibility. A cover alone does not include a board, and the Nest is reserved for the ToyBoard Pro for advanced practice with support.
Frequently asked questions
Can the ToyBoard be left outside?
Outdoor use does not mean permanent outdoor storage. Bring the board inside after the session and store it in a dry place.
Do all covers wash at 60 °C?
Do not assume this without checking the label of your reference. The documented information for Endless concerns this cover.
Who to contact for a defect or missing instructions?
The contact page allows you to reach ToyBoard. For a defect, prepare the reference and your proof of purchase; the warranty conditions remain separate from routine maintenance.